Return to Website

ATEV Information & Trading Board

Welcome to the ATEV Message Board
 


This forum is for collectors of emergency vehicle models to discuss any aspect of the industry. Feel free to post comments on current releases, future models, items for sale/trade, or items wanted.

ATEV Information & Trading Board
Start a New Topic 
Author
Comment
TARP ????

I'm looking for a material that I could use as a tarp on a large load for a stepdeck in 1/64th scale. I plan to cover the cabin area of a helicopter, so it will have to sort of conform to the shape of the aircraft. Part of the helicopter (nose & complete tail section) will be exposed. A plastic type (looking) material would probably be most prototypical.

Is there any commercially available material I can use for this project, that does not require using a sewing machine to fabricate to look scale (folds and such)? I figure JayDeez slam-locks can double as tiedown eyes. I don't want to use paper mache and paint it as it makes a real mess. Thanks for any help or suggestions.

Re: TARP ????

Chuck,
I'm not much of a scratch builder, but I was thinking...could you use sometihng like SaranWrap, and just put a couple of coats of paint on it to beef it up? Just an idea. Can't wait to see your latest endeavor. You guys who do the scratch stuff really have a talent. Hell, when I made models I was lucky if I didn't get the paint to run.

Location: Fayettevile, GA

Re: TARP ????

Chuck,

Get a brown paper towel/napkin and cut to shape. Wet it and place it over the area. Then give it a light coating of watered down white glue. This should give a realistic canvas tarp.

TO make a blue plastic tarp I would make it with a white paper towel and mix bright water based blue paint with the white glue.

Jeff

Re: TARP ????

Chuck: Some hobby shops (that carry remote control airplanes)have a material that looks just like hose cover tarps. It even comes in red. I can't remember the name of it.

Location: Md.

Re: TARP ????

You may also try Fiberglass Matting that goes over the Balsa Wood Frames for Hobby Airplanes.

Re: TARP ????

I concur with Jeff's suggestion. I used to use the diluted glue/paper towel method when I was into Armor modeling.

Another suggestion is the see if you can get your hands on some large-diameter heat shrink tubing, like the type that's used to insulate heavy electrical splices. Slip it over your subject, trim it up, then hit it with a heat gun.

Re: TARP ????

Chuck .... I found that a Kleenex tissue soaked in the paint of the colour of the tarp and shaped while wet then allowed to dry works the best and gives the matt and rough look of a tarp...use matt paint, It is messy but comes up a treat when dry and is flexible, best to give it the shape you want whilst it is wet.

Re: TARP ????

Suggestion from a scratch builder. Dilute some water with a bit of Elmer's white glue. Stir it in well. soak a kleenex tissue in the mixture after you have cut a piece that you can drape over what you want to cover. Being wet it will drap almost naturally. After it dries paint the "tarp" with a flat paint. If it is really a canvas tarp it probably would be a dark green, almost black. A modern "blue tarp" could be painted with a gloss medium to light blue because it is shiney. I don't think I would soak the kleenex directly in the paint as it would be very difficult to work with and clean up if you got any on the model and needed to wipe it clean. The white glue/water mix can be taken off with a moist Q-tip.

Re: TARP ????

Thanks to everyone. All are great ideas, and worth a try to see which works out best for my particualr need. I did pick up a plastic table cloth from a party store. Here is a shot of a first try. Maybe a combination of a couple of techniques will also work. Thanks again.

http://i56.photobucket.com/albums/g185/CFDBASHER/FDFF%20HELICOPTER/HELO1.jpg

Re: TARP ????

Thanks for the different take on it Chariots....I ended up making a mockup of the items I wanted the tarp for,XNFJ so it didn't matter about getting paint on it...will use your advice now ...good idea..

This forum will require renewal on August 3, 2009 (38)