Thanks Jim I'll take a look.

Location: Boston

Chris,

I use the crystals for all sorts of lights on my trucks. I like the 2 mm and 3 mm square for scene lights. Some of them are a bit too reflective in the clear so a little dull coat helps.

I haven't bashed the Amercom models but many of the details are raised relief. Are you sanding them off and replacing them with crystals? If not try silver paint marker and then clear colored pain or marker over top. I have even used Bare Metal Foil then the colors.

Jeff

Location: NW PA

http://www.policecarmodels.com/lightbarpaints.html

Has LEDs as small as 1.8mm . . . should be fine for 1/64 work.

Location: United States

Thanks Ray for the info. I'm not close to the level of adding working lights, but that info will be very useful when I give it a shot.

Go to www.dreamtimecreations.com

Take a look at the "flat back" rhinestones. They have them down to 2mm in size, both round and square, clear and red. They look great on 1:64.

Thanks Steve, will do